MK Products Cobra System III Gooseneck - Manual (Page 7)

Cobra Gooseneck Owner's Manual - 8/96 Page 2
CONTACT TIP SELECTOR GUIDE
WIRE SIZE TIP I.D. ** ARC TYPE LENGTH PART NO.
.023" (0.6mm)
.030" (0.8mm) Spray Arc 1-1/2" (38mm) 621-0057
.030" (0.8mm) Short Arc 1-3/4" (44mm) 621-0328
.030" (0.8mm)
.036" (0.9mm) Spray Arc 1-1/2" (38mm) 621-0325
.036" (0.9mm) Short Arc 1-3/4" (44mm) 621-0326
.030" (0.8mm)
or
.035" (0.9mm)
.040" (1.0mm) Spray Arc 1-1/2" (38mm) 621-0076
.040" (1.0mm) Short Arc 1-3/4" (44mm) 621-0077
.035" (0.9mm)
.044" (1.1mm) Spray Arc 1-1/2" (38mm) 621-0001
.044" (1.1mm) Short Arc 1-3/4" (44mm) 621-0002
.045" (1.2mm) .053" (1.3mm) Spray Arc 1-1/2" (38mm) 621-0327
.045" (1.2mm)
or
.052" (1.3mm)
*.060" (1.5mm) Spray Arc 1-1/2" (38mm) 621-0003
.060" (1.5mm) Short Arc 1-3/4" (44mm) 621-0286
1/16" (1.6mm) .075" (1.9mm) Spray Arc 1-1/2" (38mm) 621-0075
1/16" (1.6mm)
.085" (2.1mm) Spray Arc 1-1/2" (38mm) 621-0153
.085" (2.1mm) Short Arc 1-3/4" (44mm) 621-0154
contact.tbl
* Standard - Furnished with torch. ** All tips stamped with tip I.D.
NOTE: As a rule of thumb, use the smaller I.D. tip for steel, stainless steel and the 5000 series aluminum. Softer alloys such as the 1000 and 4000
series aluminum require more clearance and, therefore, use a larger I.D. tip.
GAS CUPS
CONTACT TIPS
STANDARD GAS CUPS HEAVY-DUTY GAS CUPS
SIZE I.D. PART NO. SIZE I.D. PART NO.
5 1/4" (6.4mm) 621-0079
6 3/8" (9.5mm) 001-0137
*8 1/2" (12.7mm) 001-0138 8 1/2" (12.7mm) 621-0366
10 5/8" (15.8mm) 001-0139 10 5/8" (15.8mm) 621-0367
*Standard - Furnished with torch
Standard Cup
ACTUAL SIZE
Spray Arc
Short Arc