Motion Sound SL-200S User Manual
Scalable, Amplification for kp- 200s stereo amplifiers, Warning
SL-200S SLAVE STEREO AMPLIFER
ScalablE !
Amplification for KP-
200S Stereo amplifiers.
The Motion Sound SL-200S is designed to work seamlessly with a KP-200S stereo
amplifier and will add a significant increase in volume (6 db) to a single KP-200S. Need
More? You can daisy chain up to 10 SL-200S slaves to a KP-200S for a total of 22 10”
speakers, 22 ferro cooled horns, (including the KP-200S) and 1200 watts of stereo
power. Play a smaller venue? Take just the amount of power needed.
-
Warning-
The SL-200S can produce high sound pressure levels, hearing protection is advised.
The SL-200S must be Earthed and connected to appropriate power for safe operation.
Input Design
Must be used with a Motion Sound KP-200S amplifier only.
Power Amplifier
100 watts/channel (200 watts total)
Speakers
Two 10” Eminence™ Beta™ 250 watt 8 Ohms.
Horns
Two ferro cooled 3.5” 80 watt dynamic, 8 Ohms.
Frequency Response
70 Hz – 17 Khz
Crossover
3 Khz
Power
Voltage Frequency
Watts
Fuse(Slo-Blo)
USA
117VAC
60 Hz
400
5 amp
Europe/Australia
220-240VAC
50/60
Hz
400
2.5
amp
Japan
100
VAC
50/60
Hz
400
5
amp
Fuse
Located in AC inlet module (Use correct values only)