NavCom StarFire Satellite Change Rev.G - Manual (Page 6)

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12
Rev. G vi Release - March 12
o Check Use Alternate Channel
o Check Ack/Nak
o Click OK
View D3
o After a few minutes, the receiver should be tracking the new StarFire Satellite
LBM DSP Status
Check SF Channel Number
29785 satellite located at 143.5W
29745 satellite located at 98W
29725 satellite located at 25E
Check StarFire signal C/No Value which should be above 0dB (>9dB is typical at
NavCom’s office in Southern California)
If the receiver is moved from one StarFire region to another, the receiver will not automaticly tune to
the new receiver frequency. When this occurs, repeat the initial steps with the appropriate new
Channel ID.