NavCom TS Collecting Receiver User Manual
NavCom Equipment
Advertising
Troubleshooting Guide – Collecting Receiver Configuration
This guide will step you through collecting NCT receiver configuration data from the GPS receiver via NavCom’s
StarUtil GUI program. This procedure is often used to collect data for NavCom to evaluate customer reported
difficulties.
Setup – See the Troubleshooting Guide – Communication if StarUtil is not communicating with the receiver.
9
Click Tools →
9
Save System Configuration ….to bring up the Configuration File Save window.
9
Enter an appropriate file name, with a txt
9
ctory to write the data to.
9
Click the Save File button on the bottom of the screen.
extension.
Select a dire
Rev. A
i
Release - Mar 07
Advertising