NavCom NCT-2030M Rev.C - Manual (Page 23)

NCT-2030M User Guide - Rev. C
Specifications:
- 50 Ohm input impedance
- 3Vdc > Input Voltage, High < 6Vdc
- 0Vdc < Input Voltage, Low < 1.2Vdc
- Minimum pulse width, 100nsec
- Rising or Falling edge Synchronization
Connecting the shared EVT MKR/CAN BUS port requires a
five core, 5mm diameter, cable fitted with a
LEMO plug,
type FGG.0K.305.CLAC50Z, plus strain relief, NavCom P/N
94-310062-3003.
‡
Detailed specifications of the Event Input and cable
wiring and how to configure the Event input may be found
in Appendix D of this User Guide.
2-21