Nevion DVI-SDI-2-SFP - Manual (Page 5)

DVI-SDI-2-SFP Rev. C
nevion.com | 5
2
Specifications
2.1 General
Power +5V DC / 5W, max
Control Control system for access to setup and module status
with BITE (Built-In Test Equipment)
Temperature range 0 to +40 °C
2.1 Electrical Inputs
Number of inputs 2
Connector HDMI type D
HDMI type A with use of adapter cable
DVI-D with use of adapter cable
Supported format 525i/ 625i
720p/ 1080i, 50/59.94/60Hz
1080p, 50/ 59.94/ 60Hz
640x480: converted to 720p by adding black lines
800x600: converted to 720p by adding black lines.
1024x768: converted to 1080p by adding black lines.
1280x1024: converted to 1080p by adding black lines.
Other graphical format may work.
Number of bits 24bit (3x8bit)
Bandwidth 165MHz
Format RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
Only non-HDCP protected signal
RGB Range Full or SMPTE
Audio embedding 2 channels, AES 1 group. L-PCM, 48kHz
2.2 Optical output
Number of outputs 2
Connector LC/UPC
SFP type Nevion Video SFP range, Dual transmitter
See SFP datasheet for additional specifications
2.3 Standards
SMPTE292M, SMPTE259M, SMPTE297M, SMPTE425A, SMPTE425B, SMPTE424M