NewHank DUS 1 - Manual (Page 3)

Newhank DUS1
4
Newhank DUS 1
5
1.Power switch: When pressed the machine starts.
2.Headphone output : The Standard 6.35 mm Jack output for headphones.
3.Volume Control: Volume output knob for the headphone volume.
4.Selection buttons :1 to 10 selectable for fast track search .
5.Prev button :Press the button to play the previous track .
6.Next button: press the button to go to the next track.
7.Repeat : Use this button to repeat the track or the whole map or all media .
8.R/L : Selectable output ,Left/Right or Stereo .
9.Rev Button : Press the button to search previous in the track .
10.Fwd Button :Press the button to search forward in the track.
11.LCD Display : Shows information for media content .
12.4.3 Inch Display: Shows the media content 1 on 1.
13.Key plus button Press this button to adjust the height of the tone.
14.Video switch: Press this button to switch directly from the default component output to VGA
and S-video ( Note :If you switch to VGA output the HDMI output won’t work).
15.Key min button: Press this button to lower the tone.
16.Eject button: Press this button to open and close the disc loader.
17.Time button: Use this button to change the time mode (elapsed, remaining and total time).
18.Return button: Press this button immediately returns to the beginning of the current song.
19.Play button.
20.Source button : Selectable , Disc USB ,SD.
21.Remote Control : Remote control receiver.
22.USB interface: Acceptable standard USB input: Note the format should be formatted in Fat 32.
23 SD interface: Acceptable standard SD input.
Frontpanel description Backpanel description
1. AC Power Input: accepts 110V AC to 240V AC.
2. Non - Balanced output: RCA signal left /right audio output.
3. Digital output: RCA digital signal output.
4. AV-Video output: Chinch yellow output.
5. S-Video output: S-Video out.
6. Optical output: SPDIF out.
7. Component video output: Y PbCb PrCr .
8. HDMI output.
9. VGA output.
10. XLR output: left/right symmetrical XLR output.
11 BNC Video output
Troubleshooting
No video on HDMI output : make sure the HDMI output is selected on in the menu .
The system reset its self after shutdown: make sure you have the option “last memory on” in
the menu .
USB or SD is not recognized : Make sure you have a fast SD or USB stick and is FAT-32
Formatted
www.interstateaudio.nl
www.newhank.com