Niveo Professional NMC220PR - Manual (Page 2)

Key Features
 Compliant with IEEE 802.3 1000BaseT, IEEE
802.3z 1000BaseSX/LX and IEEE 802.3af/at
Standards
 1x 1000T(X) Ethernet TP Port and 1x
1000BaseSX/LX Ethernet Fiber Port
 TP port is either PSE or PD port.
a. PSE
– Providing power to a PD device. (Max.30W)
b. PD – Getting power from PSE device.
 TP Port can support Half/Full-Duplex
Auto-MDI/MDI-X and Auto-Negotiation
 Supports Link Fault Pass-through (LFP) Function.
 One 1000BaseSX/LX Fiber Port can support either
Multi-Mode or Single-Mode, depending on Optical
Fiber Connectors
 Providing a DIP switch for Full- and Half-Duplex
selection on TP Port
 Options for 19 ” Converter Chassis :16-slot or 5-slot
for additional expansion use
Installation
I. TP port (RJ-45)
The TP port of converter supports 10Base-T ,
100Base-TX,1000BaseT Auto-negotiation, Auto
MDI/MDI-X, Flow control and Power over Ethernet
function. The cable length up to 100 meters for Cat5, 5e
or 6 cables.
II. Fiber Port
The Fiber port supports multi-mode or single-mode fiber
cables.
III. DIP Switch Setting: (LLF/LFP ON/OFF)
U sers can have LLF/LFP function turned ON or OFF by a
slide switch at the right side of the converter. The factory
default is OFF.
Connection
Technical Specifications
Standards
IEEE 802.3af PoE (PD converter)
IEEE 802.3at PoE+ (PSE converter)
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
Features
Number of Port:
1 x 1000T(X) with RJ-45 Connector
Option: PSE or PD function
1 x 1000BaseX - Fiber Connector
Data Transfer
Rate Ethernet: 1000Mbps/Half-Duplex
2000Mbps/Full-Duplex
Transmission
Media
1000BaseTX :
Cat. 5 UTP/STP or above, up to 100 m
1000BaseX:
Multi-Mode 
50/125μm or
62.5/125μm Fiber optic cable
Single-Mode 
9/125μm or 10/125μm
Fiber optic cable
Led
Indicators
RJ45: 100M/Act, 1000M/Act
SFP : Link/Act
System: Power
Power
Requirement
PSE : DC 48V / 0.83A
PD: without adaptor; getting power
from PSE
Power
Consumption
6 Watts (Max)
Dimensions 102 × 75 × 23 mm (L x W x H)
Weight 230 g
Operating
Temperature
0 to 45℃
Storage
Temperature
-20 to 90℃
Humidity 10 to 90% RH (non-condensing)
Certifications FCC, CE