OpenEye OE2-E120 Quick Start - Manual

Set Up ContinUoUS ReCoRding
pLay BaCkUp FiLe on a pC
BaCk Up ReCoRded Video
QUiCk BaCkUp
Led StatUS indiCatoR
enteR / eXit BUttonS
Power Illuminates when power is supplied to the DVR.
HDD Flashes when the hard drive is being accessed.
Record Flashes when live video is recording.
Network Illuminates when the DVR is connected to a network.
Fan Illuminates when the fan is working. Flashes when the fan is working
improperly. Unlit when the fan is not working.
Enter Input data, make selections, and open pop-up menus.
nUMeRiC BUttonS and ReC
Numeric In live and search modes, press to watch that channel full screen.
Record In live mode, press to start instant recording of all channels.
Exit Return to the previous mode or menu, without saving.
Logging in FoR tHe FiRSt tiMe
DVR User ID: admin Remote Software User ID: admin1
Password: <none> Password: <none>
Note After logging in for the first time, change the admin password for the DVR and
remote software to establish user level security. See the Manual for instructions.
Copyright ©2009 OpenEye. All Rights Reserved. Information contained in this
document is subject to change without prior notice. OpenEye does its best to provide
accurate information but cannot be held responsible for typos or mistakes.
28971AB
A12931
23221 E Knox Ave
Liberty Lake, WA 99019
1.888.542.1103
SeaRCH ReCoRded Video witH QUiCk SeaRCH
Recording
This icon always appears in conjunction with the Motion or
Continuous Recording icon.
Motion Motion Recording
Sensor Sensor (Alarm) Recording
Continuous Continuous Recording
V Video Loss Video Loss Detected
F Freeze Pause Live View
P PTZ PTZ Camera Channel
1: Channel Channel Number
C1: Channel Name User Defined Channel Name
S Smart Smart Search Mode
P Panorama Panorama Search Mode
Play Playback Mode
Pause Pause Search Video
SCReen iConS