OpenEye OE-C6012-RW Quick Start - Manual

Please carefully read these instructions before using this product.
Save this document for future use.
32853AA
model no:
OE-C6012-RW
Indoor Drop Ceiling
Camera
Quick Start Guide
1. General Specifications
Model No. OE-C6012-RW
Image Sensor Sony 1/2.8” CMOS
IP Rating N/A (Indoor)
Wide Dynamic Range True WDR
Minimum Illumination @ 50 IRE Color: 4.0 Lux @ F 1.6
B / W: 0.8 Lux @ F 1.6
0 Lux w / R LED ON
Minimum Illumination @ 30 IRE Color: 2.4 Lux @ F1.6
B / W: 0.8 Lux @ F 1.6
0 Lux w / R LED ON
Day / Night True Day / Night
Resolution 1080p (2 MP)
Focal Length 4 mm (86° FoV)
Iris Control F 2.0 Fixed
White Balance Auto, Manual, Preset
Auto White Balance Range 2000K ~ 11000K
Backlight Compensation Yes
Auto Gain Control Yes
Operating Temperature 14°F (-10°C) ~ 122°F (50°C)
Power Consumption 5W Max
Rated Amperage 0.41A
Imput Voltage Power over Ethernet / 12vDC
Weight 0.5 lb (221 g)
Dimensions (W x H) 3.56” x 4.5” (90.5 mm x 114 mm)
Housing / Dome Cover White / Clear
2. Products and
Accessories
Dome Cover
Audio, Alarm Cable
Power Cable
Screw & Plastic
Anchor - 2pcs
Template Sheet
Manual CD
Quick Manual
Deco-rings (white & black)
Camera
A - Lens
B - Tilt Stopper Screw
C - Magnetic Plate
D - Body
E - Flush Mounting Bracket
3. Product Overview
Before installing your camera, read the following precautions:
1. Determine if the site of installation can bear a minimum of five
times the camera weight.
2. Ensure that all cable runs are secure and meet local fire codes.
3. When installing your camera, be sure the installation site is clear of
unnecessary personnel and debris.
To access the restart button, detach the
body from the flush mount bracket.
1. Turn the body counter-clockwise and
pull.
4. Before Installation
Reset Button
5 0 ° 360° 8 6 °
23221 E Knox Ave
Liberty Lake, WA 99019
1.888.542.1103
A
B
C C
C D
E
Warning:
If you press the Reset button, you will
lose all settings.
Reset to Factory Default:
Press the Reset button for 5 seconds to
return the setup to the factory default.