OpenEye CM-814 - Manual (Page 59)

30101AB 59
Video OCX Protocol
On the Video OCX protocol page, you can select different protocols for streaming media
over the network. In the case of multicast networking, you can select the Multicast mode.
Video OCX protocol setting options include:
•
RTP over UDP
•
RTP over RTSP(TCP)
•
RTSP over HTTP
•
MJPEG over HTTP
Select a mode according to your data delivery requirements. If you are transmitting over
the internet using a router and port forwarding, you need to use RTP over RTSP (UDP).
You also need to forward the RTSP port to the camera (see the Network Setup page to
find the RTSP port).
Multicast Mode
1. Enter all required data, including multicast IP address, H.264 video port, MJPEG
video port, audio port and TTL into each box.
2. Click Save to confirm the setting.