OpenEye Direct PTZ - Manual (Page 4)

4
Basic Configuration
1. Click Baud Rate , and then select the Baud Rate that
corresponds with the Baud Rate output on your Keyboard
Joystick Controller. The default rate is
9600 .
2. Click Port , and then select the COM port associated with
the Keyboard Joystick Controller on your recorder or PC.
If you are using an OpenEye recorder, the default is
COM
19 .
If attaching a second Keyboard Joystick Controller
to the PC, select the COM port for the second
controller in the Port 2 box.
3. Adjust the PTZ Speed slider bar to your desired speed.