Opticom Elite H Series DVR - Manual (Page 20)

DIGITAL VIDEO RECORDER MANUAL
DIGITAL VIDEO RECODER MANUAL
20
4-4 Set alarm
Set alarm output.
The feature is designed to set off alarm during specified period when video loss occurs or when
any motion is sensed or when sensor is in operation.
☞ OPTION : Able to operate up to 16 alarms and sensors when using separate “extended
alarm sensor box”.
How to set menu : retrieve menu -> EVENT -> ALARM
The setting below is presented as an example designed to set off alarm for seven seconds when
Motion occurs. When sensor is in operation, alarm is set off for four seconds. When video loss
occurs, alarm is set off for five seconds.
( Blue-colored “sec” represents period applicable to all channels. )
HDD error seen below is designed to set off alarm when problem occurs to hard disk. The alarm
is set off during specified period. Specify period after checking. (range: a second ……)