Oregon LW301 - Manual (Page 2)

E
N
2
INTRODUCTION
LW301/302
Thank you for selecting the Oregon Scientific™ Anywhere
Weather Kit (LW30) or Kit Basic (LW302). Either one can
collect weather data via a weather sensor receiver from
different accessorial sensors, and then send the data
back to Oregon Scientific Internet server via Internet-
connected hub through Internet. It also provides a solution
for the user to have a weather station connection that can
be remote accessed from their mobile device, such as
smartphone or tablet PC.
. NOTE. Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specifications and
warnings you should know about.
PACKAGING.CONTENTS
COMMUNICATIONS.SET
LW301/302
WIND.SENSOR.
LW301
 x Internet-connected hub
 x Weather sensor receiver
 x Power adapter
(May vary in
different countries)
 x receiver
connection cable
1 x LAN cable
 x sensor
connector
2 x AA UM-3
.5V batteries
4 x Screws
(Type A)
 x Round
U- bolt
 x Wind Sensor
(WGR800)
( x Wind Vane above
and
1 x Anemometer below)
LW301_UM_EN_R8.indd 2 2012/8/14 3:05:44 PM