Locating a position on the disc, Playing a disc – Dolby Laboratories DVD26 User Manual
Page 9
5
DVD26 DVD AND CD PLAYER USER GUIDE
HOW TO GET STARTED
To play a disc
• Press the button on the front panel, or the
button on the remote control.
• Alternatively press one of the buttons 1-9 and, if requi-
red,
+10
on the remote control to start playing a specifi c
track.
For example: To play track 16; press the
+10
button fol-
lowed by the
6
button. To play track 22; press the
+10
button twice, followed by the
2
button.
To pause a CD
• Press the button on the front panel or the
but-
ton on the remote control.
The symbol will disappear from the display but the
track number in the tracklist will still be fl ashing
You can then resume play by pressing the button on the
front panel or the
button on the remote control.
Locating a position on the disc
You can step between tracks to locate a particular track on
the disc, or you can scan forwards or backwards to locate a
position within a track.
To step between tracks
• Press the or buttons on the front panel or the
remote control.
The front panel display shows the number of the track as
you step.
To scan through the disc
• Press once the button to reverse scanning or the
button to start forward scanning. You can use the button
on the front panel or the remote control
You can increase the scanning by pressing the button
(reverse) or the button (forward) again. DVD, CD and
Video CD have four scan speeds.
As you scan the disc, the front panel display shows the cur-
rent track and the and position within the track.
Release the button to start playing from the position you
have located.
Playing a disc
To insert a disc
• Hold down the button on the front panel, or the
button on the remote control, to open the tray.
• Place the CD in the tray with the label facing upwards.
• Press the button on the front panel or the
but-
ton on the remote control to close the tray.
The front panel display shows the total number of tracks
on the disc, the total duration of the disc, and the track-
list.
While a disc is playing the front panel display shows the
current track number and the elapsed time of the current
track. The track number is fl ashing in the tracking list.
To stop play
• Press the button on the front panel or the
but-
ton on the remote control.