Pacific Cycles Reach Trail(Offroad) User Manual
Reach trail(offroad)
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Reach Trail(Offroad) Owner manual
- Reach features
- Specification
- Assembly Procedures Step 1: Unpack the box – (1) a 90% assembled Reach, (2) stem, (3) stem raiser, (4) seat / seat post, (5) front wheel / QR, and (6) pedals.
- Step 2: Assemble the stem to the gooseneck, and insert the stem raiser into the head tube, adjust the handlebar height and alignment, close the QR lever on top of the stem.
- Step 3: Assemble the saddle and seat post, insert the seat post into the seat tube, and close the seat clamp QR lever.
- Step 4: Insert the front hub skewer into the front hub and screw into the nub. Insert the front hub into the front dropouts. Let the QR lever on the left side of you. Align the center of the wheel. Close the QR lever at proper tightness. Hook the brake cable.
- Step 5: Assemble the pedals into the cranks.
- Accessories: Front and rear carriers, kickstand
- How to fold Level 1. Remove front wheel and seat. Open the QR and swing the rear swing arm to get the rear wheel into the front fork.* Pull out the handlebar stem. Stand the bicycle on the rear carrier(optional) or put it into the car trunk.
- How to fold Level 2. Take off the rear wheel, pack the bike in a carrying bag for travel.