Gryphon Diablo - Manual (Page 17)

Gain:
Moving coil (MC) : 64dB
Moving magnet (MM) : 42dB
Impedance:
Moving Coil ( MC ) 20 or 100 Ohm
Moving Magnet ( MM ) 47 kOhm/200pf.
S/N ratio:
MC Input 250mV 1kHz : >72dB
MM Input 2.5mV 1kHz : >84dB
Input impedance in MC mode
With the (red) jumper placed to the right side of the jumper sockets
(JP101) and (JP301) the input impedance will be 100 Ohm in MC
mode.
With the jumper placed to the left sider of the jumper socket the input
impedance will be 20 Ohm in MC mode.
Input impedance in MM mode
The input impedance in MM mode is 47kOhm/200pF.
Switching between MM and MC ( yellow illustration )
The selection of MC or MM is made with jumpers JP100, JP102,
JP104, JP300, JP302, and JP304.
USING THE
OPTIONAL
DIABLO /CALLISTO/
TABU/ PHONO MODULE.
17