Paslode T250-F16 16 Gauge Straight Finish Nailer - Manual (Page 3)

TOOL SPECIFICATIONS
MODEL NO. T 250 -F 16 (Part# 500970)
HEIGHT 10”
WIDTH 3-1/8”
LENGTH 12”
WEIGHT 4lbs. 2oz.
OPERATING PRESSURE 80 to 120 p.s.i. (5.5 to 8.3 bars)
FASTENER SPECIFICATIONS
TOOL AIR FITTINGS
:
This tool uses a 1/4” N.P.T. male plug. The inside diameter should be .28” (7mm)
or larger. The fitting
must be capable of discharging tool air pressure when
disconnected from the air supply.
OPERATING AIR PRESSURE:
80 to120 p.s.i. (5.5 to 8.3 bars). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
NAIL LENGTH 3/4” - 2-1/2”
SHANK DIAMETER 16 gauge
TOOL AND FASTENER SPECIFICATIONS
3