Back of stove, Blower, dvs gas – DVS 99000153 User Manual

Page 3

Advertising
background image

Blower, DVS Gas

(Berkshire, Tree of Life, Prairie, Cedar, 2001 Allegiance)

Part # 99000153

Page 3 of 4

4070219

3

Slide the left side of the blower mounting bracket over the grommets on the left mounting bracket attached to the
stove (see the illustration below). Then insert the stud plate through the right side grommets and through the right
mounting bracket on the stove. Secure the stud plate with the included washers and nuts

Nut

Stud Plate

Washer

11/32”

Socket

Make sure the bracket

slides into the groove on

the rubber grommets.

Left Mounting

Bracket (on stove)

Rubber

Grommet

Blower Mounting

Bracket

Right Mounting

Bracket (on stove)

Back of

Stove

Blower Mounting Bracket

Stud Plate

Blower Mounting Bracket

4

Make sure all of the wiring is placed away from the blower impeller and the bottom of the burner. Use lock ties, if
necessary, to ensure no wires are damaged.

Advertising