Permasteel PS-SC01 - Manual (Page 4)

2. ASSEMBLE STEPS
Step 1: ATTACH MOTOR BRACKET TO LEFT
CABINET
Take out the motor bracket box from the drawer of left side
cabinet, use two 1/4-20x1/2” screws (provide with motor
bracket) to attach motor bracket on the left side cabinet.
Step 2: ATTACH SINK TO RIGHT CABINET
1) Unscrew the four setscrews of sink, and remove the sink
from right cabinet see figure (a).
2) Unpack the faucet and inlet water hose from carton.
3) Insert the faucet through faucet sink hole and attach with plastic nut see figure (b).
4) Attach the inlet water hose to treaded end of faucet under sink by screwing it in counterclockwise
see figure (c).
5) Place sink onto counter top and attach with four setscrews see figure (d).
6) Place the inlet and outlet hoses through the holes on back panel, see figure (e).
(a)
(d) (e)
(b)
(c)