Philco PHFS 8000 - Manual (Page 6)

4 Revision 06/2014 Copyright © 2014, Fast ČR, a. s.
EN
PART 3: BEFORE FIRST USE
Take the appliance and its accessories out of the packaging materials. Store packaging material for possible
future use. Wash removable accessories that come into contact with food using water and kitchen detergent.
Then thoroughly rinse them under fl owing water and dry thoroughly with a wiping cloth. More information
found in chapter "Cleaning and maintenance".
ATTENTION:
Be careful when handling the cutting disc to prevent injury caused by the blade.
PART 4: ASSEMBLING THE ELECTRIC FOOD SLICER
• Always place the food slicer on an even, dry and stable surface.
• Seat the sliding plate on to the guiding plate with groove and push gently until the lugs on the sliding plate fi t into
the grooves of the guide plate. The sliding plate is correctly seated when it can freely move back and forward.
• Attach the food pusher on to the sliding plate with a fi nger guard.
• Connect the power cord plug to a power socket.
Be careful when handling the cutting disc to prevent injury caused by the blade.
PART 5: USING THE ELECTRIC FOOD SLICER
• Set the cutting thickness adjustment dial to the required position.
• Place food on the sliding plate so that it is located between the food pusher and the cutting thickness setting plate.
• Using the speed adjustment slider, set the required cutting speed. When cutting softer food, use a lower
speed, when cutting harder food, you can use a higher speed.
• Using the power switch, start the food slicer. Position I serves to start the constant mode, position II serves
to start the pulse mode.
• Move the sliding plate back and forward and using the food pusher, move the food towards the cutting
thickness setting plate. The cut slices will fall on to a food plate.
• If the food slicer is running in the constant mode, turn it off by switching the power switch to position 0. If
the food slicer is running in the pulse mode, turn it off by releasing the pressed power switch in position II.
• Before taking away slices or remains of sliced food, ensure that the cutting disc has come to a complete
stop.
• After fi nishing using the appliance, disconnect it from the power socket.
ATTENTION:
Never use the electric food slicer for more than 10 minutes non-stop.
The speed adjustment slider can variably adjust the rotation speed of the cutting disc, in the top position the
cutting disc rotates slower, in the bottom position it rotates faster.