Posiflex HS-2512W-TS - Manual (Page 9)

9
12.
Connect the USB type-A
connector of the USB cable to
the USB port of the top I/O
interface.
13.
Break the cable-exit cover.
14.
Make the cover join to the
wedge portions of the rear
plate of the POS.
15.
Determine that the cover is
well wedged to the wedge
portions of the rear plate of
the POS.
16.
Push the cover to make the 2
hooks of the cover to wedge
the 2 wedge portions of the
rear plate of the POS.