Posiflex MR-2106 User Manual

I. features, Ii. model identifications, Iii. specifications

Advertising
background image

Page 1 / 2

MR-2100/2200 SERIES

MAGNETIC STRIPE READER

USER’S MANUAL

Rev. : Original

I.

FEATURES

Dual directional operation.

Convenient operation dual side swipe design (MR-2200).

Built-in Magnetic Stripe Reader Triple tracks.

Built-in keyboard wedge interface or RS-232 interface or USB interface.

Built-in decoder

Heavy duty die cast case

3 tracks type MSR can read also AAMVA and CA DMV card

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,

may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct
the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult

his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.

The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technology, Inc. further

disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. The entire risk
arising out of the use or performance of the software and documentation remains with you.

ABOUT THIS MANUAL

This manual is written in an attempt with full strength to assist the user to utilize the stand-alone magnetic stripe reader MR2100/MR2200 series of

Posiflex POS products. This series of products provide excellent flexibility and reliability in application. This manual covers both operational and technical
aspects of these units.

The manufacturer of the MR2100/2200 series heartily apologizes to the user for reserving the right to change or to modify this manual without

notice due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information
through any of our web sites: http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com.

 Copyright Posiflex Technology, Inc. 2011

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technology, Inc. the publisher of this documentation

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Technology, Inc. an ISO-9001 and ISO-14001 certified manufacturer.
Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.

II.

MODEL IDENTIFICATIONS

Models

Application

MR2100

MR2100-JIS2

MR2200

Interface

USB or RS232 or PS2

USB or RS232

USB or RS232 or PS2

Reader Head

ISO Single Head

JIS2

ISO Dual Side Head

III.

SPECIFICATIONS

Reader specification

Applicable card type

ISO 7811

JIS X 6302

Card feed method

Manual

Card feed direction

Bi-direction

Read / write function

Read only

Card feed speed

5 to 55 inches/sec.

100 ~ 1200 mm/sec.

Error rate

Less than 0.5%

Less than 0.1%

Card data format

Data standard

IATA

ABA

THRIFT

JIS I

JIS II

Track used

Track 1

Track 2

Track 3

(Track 2) Rear side

Applicable to

models

MR2100-MR2200

MR2100-JIS2

Recording method

F

2

F (FM)

Recording density

210 BPI

75 BPI

210 BPI

75 BPI

210 BPI

Recording capacity

characters / bits

79 / 7

40 / 5

107 / 5

40 / 5

72 / 7

Note: AAMVA and CA DMV standards are supported in 3 track ISO models

Dimensions: 14.5 cm (L) X 4.6 cm (W) X 3.4 cm (H)

Weight: 490 gm

LED: dual color -- green for good read or ready to read

red for invalid read

Rated voltage: 5 VDC

Rated current: 100 mA max.

P/N: 19030901010

警告使用者

警告使用者

警告使用者

警告使用者

這是甲類的資訊產品,在居住的環
境 中使 用 時 , 可 能會 造 成 射 頻干
擾,在這種情況下,使用者會被要

求採取某些適當的對策。

T31454

Advertising
This manual is related to the following products: