Posiflex FA-266 - Manual

Page 1 / 2
I. FEATURES
ISO 7811 or JIS I/II Magnetic Stripe Reader in USB full speed HID interface
Options for ISO MSR heads covering 1&2 and all 3 tracks
3 tracks type MSR can read also AAMVA and CA DMV card
Optional optical Finger Print Sensor in USB interface
Industry's most accurate fingerprint algorithm
Total power consumption: 300 mA @ 5V DC
Upgrade kit for fan free touch control Desktop POS terminals FT series
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct
the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult
his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technologies, Inc.
further disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire
risk arising out of the use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit FA-200 for the Posiflex fan free touch control
Desktop POS terminals FT systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to
accommodate the required security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational
aspects of these units. For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the FA-200 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due
to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of
our web sites: http://www.posiflex.com or http://www.posiflex.com.tw.
 Copyright Posiflex Technologies, Inc. 2007
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technologies, Inc. the publisher of this
documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technologies, Inc., an ISO-9001 and ISO-14001 certified manufacturer.
Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
II. INSTALLATION
1. HARDWARE INSTALLATION
For FA-200 series ordered with the host system FT series, it is installed on the system at
delivery. For separately ordered FA-200 series, it is delivered separately from the system and
needs to be fixed onto the system per following instructions before use.
No matter whether the kit itself contains the optional finger print sensor
or not, the connection to the FT system is through an internal cable in right
side cover of the LCD/touch unit. Remove the 2 circled screws in the right
picture to remove the cover for side mount upgrade kit. Take out the cable
inside this cover as circled in the picture here and connect it to connector
inside the side mount upgrade kit as arrowed in the same picture. Gently
arrange the excessive length of this cable back in the hole and screw-fit it
back to the position originally occupied by the cover as in the right picture.
Please reserve the cover if there is chance to have the side mount kit
removed in the future.
2. DRIVER INSTALLATION
1. For MSR: The magnetic stripe reader in FA-200, no matter how many tracks are in the
reader head, connects to the host through USB port working as a USB KB and therefore
requires no driver installation except setting up the USB keyboard to be enabled in system
CMOS setup if the OS does not do it automatically. Refer to “Operation Guide” for
manipulation over the reader configuration.
2. For Finger Print Sensor: To include the drivers for this sensor to perform finger print
registration or verification (authentication) in an AP requires the software programmer to
purchase and utilize its SDK (software developer’s kit). However, Posiflex delivers this
optical finger print sensor with its drivers. Please find in the mini CD delivered with FA-
200 or Product Information CD or DVD delivered with Posiflex POS system the folder for
P/N: 19890900010
警告使用者
這是甲類的資訊產品，在居住的環
境 中 使 用 時 ， 可 能 會 造 成 射 頻 干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454
FA-200 Series
UPGRADE KIT
USER’S MANUAL
Rev. : Original