Posiflex LM-2208 - Manual

Page 1
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions manual, may cause interference to radio communications. It has been tested and
found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than the authorized
technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not
follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any
damage or hazard caused by improper application.
ABOUT THIS MANUAL
This manual assists the user to utilize the LCD Monitor LM-2208/LM-2212/TM-2212. These series provide
adjustable robust construction for 8” LCD display with maximum resolution of 800 x 600 and 12” LCD display
with maximum resolution of 1024 x 768.
The manufacturer of the LM-2208/LM-2212/TM-2212 series heartily apologizes to the user for reserving the
right to change or to modify this manual without notice due to the rapid and constant progress and improvement
on science and technology. The user may always obtain the most up to date information through any of our web
sites: http://www.posiflex.com, http://www.posiflex.com.tw, http://www.posiflexusa.com.
 Copyright Posiflex Technology, Inc. 2009
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technology, Inc.
Other brand and product names are trademarks and registered trademarks and service marks of their
respective owners.
I. FEATURES
•
The LM-2208/LM-2212/TM-2212 particularly designed for Posiflex XP
series POS terminals
•
Most stable 8” or 12” LCD monitor with tilt adjust for industrial and
commercial use
•
Optional side mount devices (SD300) for TM-2212 Only.
•
High quality TFT LCD panel
•
Easy maintenance structure allowing easy cleaning
•
Super VGA monitor resolution up to 800 x 600 pixels for LM-2208 and
1024 x 768 pixels for LM/TM-2212.
•
Resistive type extra long life touch panel in USB interface (for TM-2212)
LM-2208, LM/TM-2212
LCD Monitor
User’s Manual
Rev. A0
P/N: 19680901020