Proel DIRECT100P - Manual

TECHNICAL SPECIFICATIONS
Model DIRECT100P System Type 1 channel PASSIVE DI
Input Section Insertion Loss 26 dB
Input impedance > 250 Kohm Load impedance 600 ohm or greater
Max input level +10 (PAD at 0) dBu Connector XLR male
+30 (PAD at 20) dBu System performance
+50 (PAD at 40) dBu Distortion THD < 0.007 % (50÷20k Hz 0dBu)
Connectors 1 x 1/4" jack unbalanced Frequency response 40 Hz to 20 kHz (-3 dB)
Link 1 x 1/4" jack unbalanced General
Output Section Controls PAD 0 / -20 / -40, GND LIFT
Output Transformer Balanced Dimensions (W x H x D) 134 x 50 x 105 mm
(isolated with shielding) Weight 0,55 Kg
USER MANUAL
MANUALE D'USO
BENUTZERHANDBUCH
NOTICE D'UTILISATION
MANUAL DE USO
مادختسلاا ليلد