Proel PLSPDX - Manual (Page 3)

PRODUCT DESCRIPTIONS
This product is a six channel DMX booster with one DMX input and six DMX outputs. This unit takes the incoming DMX signal and
splits the signal into six separate output channels. Each output channel and input channel are completely electronically isolated from
each other, all six output channels have independent output drivers to boost the DMX signal. In addition, a Link Out/Terminate
selector is used for secure linking when you intend to terminate DMX signal.
TECHNICAL SPECIFICATIONS
Power Input: AC 230V 50 Hz , 0.5A
DMX Connectors: 3 pin and 5 pin XLR sockets
Fuse: F0.5A 250V 5×20 mm
Dimensions: 482×135×42 mm
Weight: 2.25 Kg
CONTROLS AND FUNCTIONS
1 – Power Switch.
This switch turns on and off the main power. 2 – DMX Output.
The six DMX output channels are completely electronically
isolated and each features an independent driver that boost the
DMX signal.
3 – Link Out/Terminate Selector.
This switch is primarily meant for troubleshooting. When the switch is in “Terminate” position, DMX output is turned off and you can
not link any more units. When the switch in the “Link Out” position, this unit allows you link a second unit.
4 – DMX Output.
These jacks are used for linking a second unit.
5 – DMX Input.
These jacks are used to receive an incoming DMX signal.
6 – Fuse.
F 0.5A 250V 5×20 mm
7 – Power Input.
AC 230V 50HZ, 0.5A Max
WARNING
This apparatus must be earthed.
To prevent fire or shock hazard, do not expose this product under a high temperature or humid area.
This product is intended for indoor use only.
Replace the fuse with the same type.
3