PSE Archery Bow 2009 - Manual (Page 2)

GENERAL OPERATING INSTRUCTIONS
• Always inspect your bow thoroughly before each shooting session to insure that it is in
good working order. Check for worn or missing components and have them replaced at
an authorized PSE dealer as required, i.e. bushings, spacers, etc.
• Inspect your arrows to insure that they are straight, undamaged and that each nock is in
good condition. A cracked nock can break when fired from the bow and cause the bow
to "dry fire" resulting in possible injury to the archer and damage to the bow.
• When purchasing arrows for your bow, consult the selection chart from the arrow
manufacturer and select the correct arrow for your application. Always use an arrow that
is at least 5 grains per pound of peak bow weight. Failure to do so could cause personal
injury and damage to your bow.
BOW MAINTENANCE
Your PSE bow will give you many years of service if maintained and cared for properly.
IMPORTANT: Before servicing any PSE bow in a bow press, back out each limb bolt 4
complete turns from bottomed position.
• Keep synthetic cables and strings waxed. Apply bow string wax to your synthetic cables
and string before each shooting session.
• Strings and cables must be replaced periodically. A worn cable or string can suddenly
break causing serious injury to the archer and damage to the bow. It is recommended
that the string and cables be replaced at least every 5,000 shots or 12 months.
• Always store your bow in a cool dry place. High temperatures, such as those that can
occur in a truck or interior of a vehicle, can cause serious damage to your bow.
• After use in high humidity or damp conditions, wipe metal components of bow
with a light oil.
SAFETY
As with any weapon, safe operation of your PSE bow must always be the highest priority.
ALWAYS WEAR SAFETY GLASSES WHEN HANDLING A BOW.
Do not attempt to use your bow without proper instruction. Doing so can result in
serious injury.
a. Never "dry-fire" any bow. Dry-firing is drawing and releasing the bowstring without
an arrow on the string. Dry-firing will likely cause damage to the bow and serious
injury to the archer.
b. Always be sure of your intended target as well as what lies behind the target area. An arrow
can travel a considerable distance, so it is important to have a safe and sound backstop.
c. If you draw a bow and need to let it down, do so in a slow and careful manner. Keep
your support arm straight and prepare for a rapid and violent let-down. Avoid hitting
your hand on protruding accessories such as the cable guard or quiver. Keep your head
and face back and out of danger during let-down. Never draw a bow with a peak
weight above your comfort level. Always use a bow sling when drawing a bow.
d. Never modify any part of the bow or its components by drilling extra holes or removing
material. This voids the warranty and presents safety problems.
Thank you from the entire PSE family for purchasing a PSE bow!
Your PSE bow was manufactured from the finest materials available
and handcrafted with pride in the USA. With proper care you will
enjoy the use of this product for years to come.
Please read this entire booklet before shooting or adjusting your bow. Remember,
many adjustments to a compound bow require the use of a bow press. Whenever
shooting a bow, be certain of your target as well as what else lies downrange.
2