Denon AVR-1312 - Manual (Page 41)

38
Adjusting the sound field effects
Tone
around items indicate the settings made upon purchase.
Adjust the tonal quality of the sound.
1
Press TONE .
[ ] [ENTER] Enter Return
Tone
Tone Control OFF
2
Use o p to select “ON”.
ON Allow tone adjustment (bass, treble).
OFF Playback without tone adjustment.
NOTE
The tone cannot be adjusted in the direct mode.
3
Press ui to select an item to be set, and use o p to select a setting value.
Bass Adjust low frequency range (bass).
• –6dB – +6dB (0dB)
Treble Adjust high frequency range (treble).
• –6dB – +6dB (0dB)
“Bass” or “Treble” can be set when “Tone Control” is set to “ON”.
NIGHT MODE
around items indicate the settings made upon purchase.
Optimized setting for late-night listening.
Press NIGHT to select your desired mode.
D.Comp:OFF
OFF Not set.
Low Set the adjusted value to “Low”.
Mid Set the adjusted value to “Middle” .
High Set the adjusted value to “High”.
When a Dolby TrueHD signal is output, “DRC” is displayed on the TV screen.
The setting mode is also changed as shown below.
OFF Not set.
Low Set the adjusted value to “Low”.
Mid Set the adjusted value to “Middle”.
High Set the adjusted value to “High”.
Auto Automatic dynamic range compression on/off control according to the source.
• If you do not press any button for approximately 5 seconds, the menu screen light turns off. Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
BD