RGBLink MSP 216 User Manual - Manual (Page 30)

MSP 216 User Manual 30
Power indicator light is off or blinks
1. Check whether plug in the power cord, and has power supply;
2. Check whether the power cable is connected, and in good
connection;
3. If above without problem, then the power indicator is damaged.
Signal indicator light is off or blinks
1. Check whether connect the signal;
2. Check whether the input signal, input wire and output wire are
normal, the interfaces are in good connection;
3. If above without problem, then the signal indicator is damaged.
12V power interface poor contact
1. Check whether the power interface is in good connection, if the
interface is not tighten, screw it again.
2. Check whether any problem with adapter head, replace it if
there is any problem.
3. Check the power connector is loose, if so, please send to
processional personnel for repair.