RLE TEAMS - Manual

Z204260-0A PAGE 1 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 03121
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
ENVIRONMENTAL SENSORS INSTALLATION GUIDE
Wall Mount Temperature Transmitters
Installer’s Specifications
Input Power 4-20mA version: loop powered 24VDC only;
0-10V version: 3-wire, observe polarity, 12-30VDC;
0-5V version: 3-wire, observe polarity, 24VAC, 12-30VDC
Analog Output, mA version 2-wire, not polarity sensitive (clipped and capped)
Sensor Type Solid state, integrated circuit (transmitter)
Accuracy ±0.5°C (±01°F) typical
Temperature Range 10° to 35°C (50° to 95°F)
TEA SEriES TEA SEriES
DIMENSIONS
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
PRODUCT IDENTIFICATION
INSTALLATION
1. Disconnect power to the junction box.
2. Remove junction box cover.
3. Wire as shown (see Wiring Diagrams)
4. Screw TEA cover onto junction box.
4.5"
(115 mm)
0.3"
(6 mm)
0.5"
(13 mm)
2.8"
(70 mm)
3.2"
(82 mm)
Output US or EU
M =4-20mA
V = 0-10VDC
J = 0-5VDC = Standard
TEA S