ROTEL RT1080 - Manual (Page 9)

9
The main functions of the RT-1080 are easy
to install and use. If you have experience with
other stereo systems, you shouldn’t find any-
thing perplexing. Simply plug in the associ-
ated components and enjoy.
Key Features
• Full-function wireless remote control
• User-friendly Fluorescent Display
• AM and FM tuning capabilities
• 30 Station Presets for memorizing your
favorite stations
• Manual frequency and preset tuning, auto-
search tuning, preset scanning, and fre-
quency direct tuning.
• RDS (Radio Data System) capability for
Europe and RBDS (Radio Broadcast Data
Service) capability for the USA.
• Dual selectable FM antenna inputs
• Stereo/mono switching, selectable local/
distance antenna attenuation, selectable
narrow/wide IF band.
• 12 volt trigger connections for remote turn
on/off by Rotel preamplifiers and surround
processors.
• Computer I/O connection for operation of
the unit from a home automation control-
ler or a computer running special software
Unpacking
Carefully remove the RT-1080, the remote
control, and accessories from the shipping
carton. Save the shipping carton and all en-
closed packing material for future use. Ship-
ping or moving the unit in anything other than
the original packing material may result in se-
vere damage.
Keep the original sales receipt. It is your best
record of the date of purchase, in the event
warranty service is ever required.
Placement
Like all audio components that handle low-level
signals, the RT-1080 can be affected by its
environment. Avoid placing the RT-1080 on
top of other components.
The RT-1080 generates some heat as part of
its normal operation. There should be 10 cm
(4 inches) of clearance around the chassis,
and reasonable airflow through the installa-
tion location, to prevent overheating.
Place the unit on a solid shelf. We recommend
installing the RT-1080 in furniture designed to
house audio components. Such furniture is de-
signed to reduce or suppress vibration which
can adversely affect sound quality. Ask your
authorized Rotel dealer about component fur-
niture and proper installation.
The RT-1080 is supplied with an RR-T92 re-
mote control and must be placed where the
infrared signal from the remote can reach the
front panel Remote Sensor.
Cables
Keep power cords, digital cables, and audio
cables away from each other. This will mini-
mize the chance of the audio signal cables
picking up noise or interference from the power
cords or digital cables. Using high quality,
shielded cables will also help to prevent noise
or interference. If you have any questions see
your authorized Rotel dealer for advice about
the best cable to use with your system.
Remote Control
The RT-1080 includes an RR-T92 remote con-
trol that operates many of the features of the
RT-1080.
Remote Sensor
The remote sensor receives infrared signals
from the remote control. Do not cover or block
the sensor. It must be unobstructed or the re-
mote control will not work properly.
The operation of the remote sensor can also
be affected if exposed to bright sunlight or
certain types of lighting (such as halogen lights)
that emit infrared light. In addition remote con-
trol functions may not work reliably if the bat-
teries in the RR-AT92 are weak.
NOTE : To use the remote, aim it at the remote
sensor on the front panel of the RT-1080.
Remote Control Batteries
Two UM-4/AAA size batteries (supplied) must
be installed before the remote control can be
used. To install the batteries, remove the cover
on the back of the RR-AT92. Install the batter-
ies as shown in the illustration in the battery
well. Test the control for proper operation, then
replace the cover. When the batteries become
weak the remote control won’t operate the
RT-1080 consistently. Installing fresh batteries
should eliminate the problem.
NOTE
: Remove the batteries from the remote
if it will not be used for a long period of time.
Do not leave run down batteries in the re-
mote control; they can leak corrosive chemi-
cals which will damage the unit.
Rear Panel Connections
The RT-1080 provides rear panel connections
for audio line level output, two FM antennas,
an AM antenna, computer interface, a remote
IR connection, 12V trigger connections for re-
mote turn-on and AC power input.
NOTE : Do not plug any system component into
an AC source until system hookup is com-
plete and you are sure that all connections
have been properly made.
RCA Outputs
A pair of line level RCA audio outputs sends
a fixed-level stereo signal from the RT-1080
to your preamplifier, surround processor, or
integrated amplifier. Use a standard RCA au-
dio cable to connect the
left output jack to the
left channel tuner input on your system con-
troller and the
right output jack to the right chan-
nel tuner input on your system controller.
AM Loop Antenna
The RT-1080 includes a loop antenna to re-
ceive AM radio signals. Remove this antenna
from the box and locate it near the RT-1080.
Connect the 300 ohm twin-conductor wire from
the loop antenna to the pair of screw termi-
nals labeled AM LOOP, attaching one wire
to each terminal. It does not matter which wire
attaches to which terminal, but make sure that
the connections are solid and that the two wires
do not touch.
English