Royal Cozyfires LFX6 & LFX6Halo - Manual (Page 5)

5 LFX6H 010710
Replacing the lamp
Disconnect the appliance from the mains!
Allow the appliance to cool!
Ensure replacement lamp is 230-240 Volts~
with a B22 bayonet connection; see Spare parts
list for lamp specifications (page 6).
Do not use lamps of a higher wattage.
Ensure that the lamp holder is held securely when removing or replacing the
lamp.
Remove the trim, unscrew and remove Front Panel to gain access to lamp(s).
Push in and rotate anti-clockwise to remove the used lamp (Fig. 1).
Re-fit in reverse order.
Cleaning
Before commencing work, turn off appliance and remove plug from socket.
For general cleaning, use a soft clean duster or a soft brush.
The decorative trims for this appliance have a protective coating.
NEVER USE SCOURERS, ABRASIVES OR CHEMICAL CLEANERS.
Servicing is only to be carried out by competent/qualified persons.
Technical data
MODEL LFX 6H LFX 6 HALO
Voltage 220-240~ 220-240~
Frequency 50Hz 50Hz
Fuse 13 Amp 13 Amp
Minimum heat output (low) 1 kW 1 kW
Maximum heat output (high) 1.9 kW 1.9 kW
Fig.1
Clockwise
Anti clockwise