Water – Scotsman C1448 User Manual

Page 7

Advertising
background image

C1448, C1848 D

Air and Water Cooled User Manual

December 2014

Page 6

Water

The quality of the water supplied to the ice machine

will have an impact on the time between cleanings

and ultimately on the life of the product. There are

two ways water can contain impurities: in suspension

or in solution. Suspended solids can be filtered out.

In solution or dissolved solids cannot be filtered,

they must be diluted or treated. Water filters are

recommended to remove suspended solids. Some

filters have treatment in them for suspended

solids. Check with a water treatment service for a

recommendation.

Scotsman filters:
A triple head filter is recommended for the potable

water. Either the Scotsman SSM3 taste and odor filter

system, or the ADS-AP3 Aqua Patrol system. RO

water. This machine can be supplied with Reverse

Osmosis water, but the water conductivity must be no

less than 10 microSiemens/cm.

Condenser Water Supply - filtration not recommended

for this water supply

GPH, 70 degree water

C1448W

70

C1848W

106

Potential for Airborne Contamination
Installing an ice machine near a source of yeast

or similar material can result in the need for more

frequent sanitation cleanings due to the tendency of

these materials to contaminate the machine.

Most water filters remove chlorine from the water

supply to the machine which contributes to this

situation. Testing has shown that using a filter that

does not remove chlorine, such as the Scotsman

Aqua Patrol, will greatly improve this situation, while

the ice making process itself will remove the chlorine

from the ice, resulting in no taste or odor impact.

Additionally, devices intended to enhance ice machine

sanitation, such as the Scotsman Aqua Bullet, can

be placed in the machine to keep it cleaner between

manual cleanings

Water Flush
Cube ice machines use more water than what ends

up in the bin as ice. While most water is used during

ice making, a portion is designed to be drained out

every cycle to reduce the amount of hard water scale

in the machine. That’s known as water flush, and an

effective flush can increase the time between needed

water system cleaning.

In addition, this product is designed to automatically

vary the amount of water flushed based on the purity

of the water supplied to it. The water flush rate can

also be set manually.

Adjustments of flush due to local water conditions are

not covered by warranty.

Advertising
This manual is related to the following products: