Scotsman C1448 - Manual (Page 17)

C1448, C1848, C2148W
Air and Water Cooled User Manual
November 2006
Page 16
Water flush setting
The water flush is factory set to the automatic
position, suitable for most water conditions. The
setting can be changed to one of 5 manual settings or
left on automatic.
Flush setting 1 - Minimum 2 - Moderate 3 - Standard 4 - Heavy 5 - Maximum A - Automatic
Water Type RO water or
equivalent
Factory
Setting for
typical water
High TDS
water
Any with
conductivity
not less
than 10
To set:
1. Switch the machine OFF by holding the Off button
in until a number or the letter A shows on the
display.
2. Press and release the On button repeatedly until
the number on the display corresponds to the
desired setting.
3. Press and release the Off switch again to return to
the normal control state.
Power
Status
Water
De-Scale
On
Off