Daewoo DF-4501P - Manual (Page 13)

SETUP
19 18
Initial Setup Initial Setup
Clock Set
1
Follow steps 1-2 as shown under ‘Manual Set’.
2
Use [ …/†] to select ‘Clock Set‘.
3 Press [ENTER]. The ‘Clock Set’ menu appears.
4
Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
…/† (up/down): Changes the setting at the current cursor position.
5 Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup
menu.
Auto Scan
The DVD Recorder+VCR has a frequency synthesized tuner capable of
receiving up to 119 channels. These include VHF channels 2-20, 74-80, UHF
channels 21-69 and CATV channels 1-41.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in ‘Connecting Antenna/Cable‘ on page 11.
1
Follow steps 1-2 as shown under ‘Manual Set’.
2
While ‘Installation‘ is selected, press [ …/†] to select ‘Auto Scan‘.
3 Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area
and place them in the tuner’s memory.
• After Auto Scan is complete, follow the instructions above to make sure that Tuning Band is set correctly.
6 Select ‘Reception‘ using [ œ/√].
Use [ …/†] to select the desired broadcast system (Aerial or Cable).
Aerial: If you are using a standard antenna to receive channels.
Cable: If you are using basic cable to receive channels.
7
Select ‘Auto Search‘ using [ œ/√].
Search the real channel number by pressing [ …/†].
8
Select ‘Fine Tune‘ using [ œ/√]. You can adjust the fine tuning by
pressing [ …/†].
9
Select ‘Decoder‘ using [ œ/√].
When the program is encoded (and you have a decoder connected to
socket EURO AV2), press [
…/†] to select ‘On’ .
10
Select ‘Store Channel‘ using [ œ/√].
Use [ …/†] to select program number to store and press [ENTER].
11 Select ‘Program Name‘ using [ œ/√]. Press [ENTER] to move to the
second level. If your DVD Recorder+VCR is showing no station name or
is showing a station name incorrectly, you can correct this.
You can create the station name and enter a 4-digit name. Change the
letters with the [
…/†], move the next letter with the [œ/√].
Manual Set
Standard
PAL BG
Reception
Aerial
Auto Search
…
†
25
Store Channel
PR No. NAME
4 P-04 Store
Cancel
Decoder
Off
Fine Tune
0
Manual Set
Standard
PAL BG
Reception
Aerial
Auto Search
25
Store Channel
PR No. NAME
4 P-04 Store
Cancel
Decoder
Off
Fine Tune
…
†
0
Manual Set
Standard
PAL BG
Reception
Aerial
Auto Search
25
Store Channel
PR No. NAME
4 P-04 Store
Cancel
Decoder
…
†
Off
Fine Tune
0
Manual Set
Standard
PAL BG
Reception
Aerial
Auto Search
25
Store Channel
PR No. NAME
4 P-04 Store
Cancel
Decoder
Off
Fine Tune
0
…
†
Manual Set
Standard
PAL BG
Reception
Aerial
Auto Search
25
Store Channel
PR No. NAME
Program Name
4 P-04 Store
Cancel
Decoder
Off
Fine Tune
0
P-04
Clear
Space
OK Cancel
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
Manual Set
Standard
PAL BG
Reception
…
† Cable
Auto Search
- -
Store Channel
PR No. NAME
- - P-04 Store
Cancel
Decoder
Off
Fine Tune
0
Installation
Manual Set
•Auto Scan
Clock Set
Adjust channels
Choose OK Exit ENTER SETUP œ √ …
†
Installation
Manual Set
Auto Scan
•Clock Set
Adjust channels
Choose OK Exit ENTER SETUP œ √ …
†
Auto Scan TV
1 CHs found
Clock Set
…
1 1 2005 00 40
†
NB. You must backspace any digits already in the name box before
you can enter a new name.