Dynex DX-32L151A11 - Manual (Page 14)

10
Making connections DX-32L151A11/DX-37L130A11
• Good - Video composite cable
• Better - Video component cables
• Best - HDMI cable
Notes:
• We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
• Do not bundle the coaxial cable with the power cord or any other
cables.
• If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
Connecting a VCR, camcorder, or game
console
Note: If the VCR, camcorder, or game console has component jacks
(better), or an HDMI jack (best), connect them using the best available
connection.
To connect a VCR, camcorder, or game console:
1 Make sure that your TV’s power cord is unplugged and the VCR,
camcorder, or game console is turned off.
2 Connect one end of a standard AV cable (not included) into the
AV IN VIDEO jack on the side of the TV, then connect the other
end of the cable to the AV OUT VIDEO jack on the external
device.
3 Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the external device,
then connect them to the AV IN AUDIO-L and AUDIO-R jacks on
the side of your TV.
To play the external AV device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select AV, then press ENTER.
Note: You can also press VIDEO once to select AV.
3 Turn on the device, then start playback on the device.
Connecting a computer
To connect a computer:
1 Make sure that your TV’s power cord is unplugged and the
computer is turned off.
2 Connect one end of a VGA cable (not included) to the PC IN VGA
jack on the back of the TV, then connect the other end of the
cable to the VGA jack on the computer.
3 Connect one end of an audio cable (not included) to the
PC IN AUDIO jack on the back of the TV, then connect the other
end of the cable to the AUDIO OUT jack on the computer.
Note: The audio cable should have a stereo mini-plug.
To play video from the computer:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the computer display
properties as needed.
Connecting a home theater system
Connecting using an analog audio cable
To connect using an analog audio cable:
1 Make sure that your TV’s power cord is unplugged and the audio
amplifier is turned off.
2 Connect one end of a audio cable (not included) to the AUDIO
OUT jacks (L/R) on the back of the TV.
Note: Cable connectors and jacks are often color-coded. Match the colors
when you connect the AV cable.
3 Connect the other end of the audio cable to the AUDIO IN jacks
on the home theater system.
AV
I
N
L
R
V ID
EO
A UD
IO
H DM
I 2
SER
VICE
POR
T
VCR
AV cable
Side of TV
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
Game console
Camcorder
Back of TV
Computer
VGA cable
Audio cable
Back of TV
Audio amplifier
Audio cable
DX-32L151A11-37L130A11_10-0567.book Page 10 Tuesday, June 1, 2010 9:26 AM