Sensoray 615 - Manual (Page 7)

7
System Requirements
A Pentium III CPU with 128MB of RAM is recommended. When using multiple boards in the system,
hard drive access speed may become an issue. Fast hard drive (UDMA/66 or faster) is recommended.
Specifications
Video sources NTSC, PAL, SECAM, RS-170, CCIR
Video inputs 16 analog composite video, 75 Ohm termination (may be
disabled by removing jumpers)
Output formats:
§ uncompressed
§ compressed
Y8 (8 bits/pixel), YCrCb (16 bits/pixel), RGB (24 bits/pixel)
baseline JPEG
Output resolution (max), pixels 704x480 (NTSC, RS-170)
704x576 (PAL, SECAM, CCIR)
A/D resolution:
luminance channel
chrominance channel
8 bit
8 bit
Capture rate 1 Real time:
30 fps (NTSC, RS-170)
25 fps (PAL, SECAM, CCIR)
Bus requirements PCI, 33 MHz, 32-bit, 5 V; 3.3V power source required 2
Power consumption 4 W
Operating temperature 0 ° C to 70 ° C
Notes:
1. The numbers for the capture rate refer to the case when 2 model 615 boards are running in the
system without any other applications. The actual capture rate may be lower in case other
Windows applications are using the system resources required for model 615 operation (PCI bus,
hard drive).
2. A special revision of model 615 is available for systems without a 3.3V power supply. Please
contact Sensoray for details.