Sierra Video 507140 User Manual

Input and output connections, Jumper settings

Advertising
background image

Sierra Video Systems Digilinx Audio Analog to Digital Converter


The Sierra Video Systems 507140 contains 2 identical stereo 24 bit Analog to Digital Converters. Each
converter has full differential inputs and both AES and SPIF outputs are available. The converters can be
locked to an external AES audio stream or used free running using an extremely stable internal oscillator
with selectable sample rates of 32Khz, 44.1Khz, and 48Khz.

Input and Output Connections:

Looking at the back panel of the module, here are the electrical connectors for the card;

A Channel

A Channel

B Channel

External

B Channel

Output Output Inputs

Inputs

Ref

Output

Output

SPIF AES

AES SPIF

For each input connector, the pin outs are;

Left Channel

Right Channel

- +

Gnd

Gnd

- +



For each output terminal connector, and the external reference input, the pin outs are;

+

Gnd

-


Jumper Settings:

Jumper Definitions:

The Following Graphics are used to describe the jumper setting on the board.

Indicates that a Suite Case Jumper is installed on the indicated header

Indicates that there is NO jumper installed on the indicated header

Sample Rate Adjustment

:

JP13 is used to change the internal Sample Rate Clock for this board. Both Channel A and
Channel B use the same sample rate clock.

48 KHz sample rate

32 KHZ sample rate

44.1 KHz sample rate

INVALID setting - do not use

Advertising
This manual is related to the following products: