Silvestri F114 Adapter plate for Hassel H on Flexicam - Manual

Adapter plate for Flexicam - Hasselblad H interface
Instructions
silvestri
Code: F114
Attention: The digital back has to be mounted with the adapter plate removed from the camera body.
Insert the digital back in the lower plate of the adapter (1), slightly move the back horizontally to center it until it finds
lodging in the centering reference points. Gently press the upper part of the digital back close to the adapter plate, do
not force it!
Operate the hooking lever placed on the back side of the adapter plate (2) and simultaneously press the back to touch
the adapter plate ( for the digital backs that have a safety lever, operate this lever at the same time too), release le lever.
Check that the digital back is properly and firmly attached to the adapter.
Via Della Gora 13/5 - 50025 Montespertoli FI, Italy
e.mail [email protected] - www.silvestricamera.com
Tel +39.0571.675049 Fax +39.0571.675919
silvestri
1
2