Skutch Electronics CK-1A3 User Manual
Ck-1a3, Promotion-on-hold adapter, Introduction
Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
V2.00
CK-1A3
Promotion-On-Hold Adapter
(For AT&T EP5962) 9/29/07
Introduction
Thank you for purchasing the
Skutch CK-1A3 Promotion-On-
Hold Adapter for the AT&T
EP5962 two line cordless phone
system. The CK-1A3 is a true plug
and play device. The unit does not
require any "Learning" to operate.
When a call is placed ON HOLD
from the base set, or any one of the
cordless phones, the caller will hear
the Promotion-On-Hold audio.
When the line is re-answered, the
audio automatically stops. It's that
simple!
Installation
(Single Mod Cord)
1- Turn the phone upside down and connect the short modular cable from the CK-1A3
box to the AT&T EP5962 telephone jack that is labeled “LINE 1/ L1+L2”. (See Fig. 1).
Fig. 1
Fig. 2
Sensor board
Power Cube
Audio Cable
For CD Players ONLY!
Line 1/ L1+L2