Skutch Electronics CK-1A4 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
3D PAD Version
CK-1A4
Promotion-On-Hold Module
For the AT&T 1040, 1070, and 1080 series of Phones
6/12/14 V4 S/N B407000 and above
Introduction
Thank you for purchasing the Skutch
CK-1A4 Promotion-On-Hold Module for
the AT&T 1040, 1070, and 1080 four line
phone system. This unit ONLY works
with these 3 phone models. The CK-1A4
is a true plug and play device. This unit
requires an external sound source such as
a Digital MP3 Player to provide the
Promotion-On-Hold audio. When a call is
placed ON HOLD from any of the
phones, the ON HOLD caller will hear the
Promotion-On-Hold audio. When the line
is re-answered, the audio automatically
stops. It's that simple!
Installation
The SENSOR Board MUST be stuck to
the phone or this unit will not function.
The Sensor Board has a plastic PAD that
has been custom made to fit the contour of
the telephone. This makes it very easy to
align the sensor board. The Sensor Board
should almost snap in to place and fit
snuggly. We have supplied extra adhesive
strips in case they are needed.
SENSOR Board
Audio Cord
Audio Adapter
CK-1A4
Box
Flat Cable
Power Cube
CK-1A4 Installed on 1040