Skutch Electronics CK-1P3 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
CK-1P3
Promotion-On-Hold
Adapter
(For Panasonic
KX-TG6500B and KX-TG6502B)
Introduction
Thank you for purchasing the
Skutch CK-1P3 Promotion-On-Hold
Adapter for the Panasonic KX-
TG6500B & KX-TG6502 two line
cordless phone system. The CK-1P3
is a true plug and play device. The
unit does not require any "Learning" to operate. When a call is placed ON HOLD from
the base set, or any one of the cordless phones, the caller will hear the Promotion-On-
Hold audio. When the line is re-answered, the audio automatically stops. It's that simple!
Installation
1- Position the CK-1P3 box under the base telephone with the jacks facing towards the
back of the phone. Remove the paper backing from the two double sided foam tape on
the top cover of the CK-1 black box, and attach the phone to the cover. (See Fig. 1).
2- Connect the short modular cord from [1&2 Phone on CK-1] to [LINE 1/2 on Phone].
Fig. 1
Sensor Board
Sensor Cable
Power Cube
Audio Cord
Line 1\2
To LINE