Skutch Electronics CK-1P4 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
CK-1P4
Promotion-On-Hold Module
(For Panasonic
KX-TG6700B and KX-TG6702B)
Introduction
Thank you for purchasing the
Skutch CK-1P4 Promotion-On-
Hold Module. The CK-1P4 is a
true plug and play device. The unit
does not require any "Learning" to
operate. When a call is placed ON
HOLD from the base set, or any one
of the cordless phones, the caller
will hear the Promotion-On-Hold
audio. When the line is re-
answered, the audio automatically
stops. It's that simple!
NOTE: You can NOT use the
“Transfer to Answering System”
with this module. This is ONLY
when you transfer a call to the
answering device, AFTER you have already answered and talked to the person! When a
call is answered by the answering device, the Answering System works perfectly.
Installation
1- Position the CK-1P4 black box under
the base telephone with the jacks facing
towards the back of the phone. (See Fig.
1).
Black Box
CK1P4
Power Cube
Sensor Board
Short Mod Cord
Sensor Cable
Audio Cord (For CD Player ONLY!)
Connect to Wall Jack
To Audio Source
LINE 1 /2 LINE 2 Fig. 1