Skutch Electronics CK-1R4 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
CK-1R4
Promotion-On-Hold
Module
(For RCA 25260 phone)
9/9/13
Introduction
Thank you for purchasing the Skutch
CK-1R4 Promotion-On-Hold Module.
The CK-1R4 is a true plug and play
device. The unit does not require any
"Learning" to operate. When a call is
placed ON HOLD from the base or any
one of the cordless desk sets or cordless
phones, the caller will hear the
Promotion-On-Hold audio. When the line is
re-answered, the audio automatically stops.
It's that simple!
It should be noted that the 25260
telephones BEEP every 10 seconds when
placed ON HOLD. This is a function of the
telephone, NOT the CK-1R4. This BEEP can
NOT be disabled. The BEEP will be heard
along with the Production-On-Hold Audio.
Installation
1- Position the CK-1R4 Silver box behind
the base telephone with the jacks facing
towards the back of the phone.
2- Disconnect the modular cord from the
back of your phone at the jack labeled
[LINE 1 + 2], and connect it to the silver box
jack labeled, [1&2 Line].
Silver Box
Power Cube
Audio Cable
with Adapter
Sensor Board
Flat Cable
Telephone Cord