Skutch Electronics CK-1R3 - Manual

Page 1 of 4
"Telecommunication Products to solve Telecommunication Problems"
CK-1R3
Promotion-On-Hold
Module
(For RCA 25255RE2-A)
4/13/2010
Introduction
Thank you for purchasing the
Skutch CK-1R3 Promotion-On-Hold
Module. The CK-1R3 is a true plug
and play device. The unit does not
require any "Learning" to operate.
When a call is placed ON HOLD from
the base or any one of the cordless
phones, the caller will hear the
Promotion-On-Hold audio. When the
line is re-answered, the audio
automatically stops. It's that simple!
It should be noted that the 25255
telephones BEEP every 10 seconds
when placed ON HOLD. This is a
function of the telephone, NOT the CK-
1R3. This BEEP can NOT be disabled.
The BEEP will be heard along with the
Production-On-Hold Audio.
Installation
1- Position the CK-1R3 black box
behind the base telephone with the
jacks facing towards the back of the
phone.
2- Disconnect the modular cord from the
back of your phone at the jack labeled
[LINE 1 + 2], and connect it to the black
box jack labeled, [1&2 Line].
Black Box
Power Cube
Sensor Board
Sensor Cable
CK-1R3 Components
Audio Cord
Modular Cable