Sloan EAF-200 Series Extension Kit User Manual
Install the extension kit
Code No. 0816728
Rev. 0 (08/07)
INSTALLATION INSTRUCTIONS
EAF-200/250/275 LINO AND SOLIS™
FAUCET EXTENSION KIT
SLOAN VALVE COMPANY • 10500 Seymour Avenue • Franklin Park, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380
www.sloanvalve.com
Printed in the U.S.A. 08-07
Copyright © 2007 SLOAN VALVE COMPANY
The information contained in this document is subject to change without notice.
2. Install the Extension Kit
A.
Install O-ring
onto Extension
Cylinder.
B.
Remove flexible supply hoses.
C.
Remove retainer nut, retainer, gasket
and stud.
D.
Remove O-ring.
B.
Install stud
included with kit,
into base of faucet.
D.
Connect flexible
supply hoses
included with
Extension Kit into
base of faucet.
Refer to Installation Instruction Manual
0816490
included with your EAF-200 Series Faucet for
complete Faucet installation. Begin at Step 1B.
C.
Guide Extension
Cylinder over
flexible supply
tubes and stud.
1. Remove the Retainer Nut, Retainer, Gasket, O-ring, Stud and Flexible Supply Hoses
A.
Remove screw.
E.
Replace and
tighten screw.
G.
Tighten Adapters
(Adapters included
with EAF-35-A only).
F.
Slide Extension
Cylinder to base
of faucet.