Product - installation diagram, Introduction, Installation – Smart Avi VCA-100 User Manual

Page 2: Using the vsa-100, Applications, Features

Advertising
background image

Introduction

The VSA-100 is Smart Adjustor that compensates for skew
delay between any Red, Green Blue signals transmitted
over a twisted pair cable. Any CAT5 or CAT6 cable can
introduce delay between the pairs, due to the varying
lengths of each pair. The delay causes color distortion
and improper alignment. Skew delay increases as the
length of the cable increases. The VSA-100 corrects the
skew of each color independently, making it the perfect
skew correction tool.

Installation

1.

Turn off the receiving video extender, the display

and the VSA-100.

2.

Connect the included male to male VGA cable to

the receiving video extender.

3.

Connect the other end of that male to male VGA

cable to the input of the VSA-100.

4.

Connect the VGA display to the output of the VSA-

100.

5.

Power on the receiving video extender and the

display.

6.

Connect the power cord to the VSA-100.

Using the VSA-100

The skew of the signal is adjusted using the three color

channels of VGA which are Red, Green and Blue. There

are six buttons on the front of the VSA-100, two for

each color. When looking at the image on the display,

choose the color that looks most out of line compared

to the others. For example, if the image looks like it

has green fringe, choose the green adjustment. While

changing the skew of a particular color channel, watch

the image for changes in alignment. It is best to choose

one color that the other two will be aligned to. For

example if green was the best aligned color, you would

adjust only the blue and red to compensate. Align

the colors in the image until there is no visible fringe

and the image looks clear. The VSA-100 will retain this

setting even after it is powered off.

Product - Installation Diagram

Applications

Corporate or Educational Presentations

Financial (Remote Servers/User Control)

Call Centers

Industrial (Long-Range Workstation Isolation)

Information Terminals/Kiosks

Airport Installations (Air Traffic Control/Passenger

Information)

Educational Environments with remote displays

Features

Aligns the RGB of any analog video signal

Each color can be adjusted individually

Supports UXVGA and Y-Pb-Pr

62 ns total delay

2 ns delay step increments

Memorize and Button Lock functions

Digitally saves settings and remembers last state

Compatible with most of the SmartAVI extenders

VSA-100

VIDEO

EXTENDER

VIDEO

EXTENDER

VGA

VGA

VGA

1,000 ft over CAT5

AFTER

VIDEO

EXTENDER

VIDEO

EXTENDER

VGA

VGA

1,000 ft over CAT5

BEFORE

What is Skew Delay?

TRANSMITTER

TWISTED PAIR CABLE

RECEIVER

CAT5 and CAT6 cables have pairs of wires that are

twisted at different rates, and some pairs are longer

than others. Because RGB signals are sent along

different pairs, there is a delay in the arrival of the

signals at the receiver. This results in color separation

and degradation of the image quality. The longer the

cable, the worse the skew delay.

VSA-100 Rear

VSA-100 Front

Advertising
This manual is related to the following products: