Smart Avi SmartNet-V - Manual (Page 21)

Page 21 MNSNV102005Ver1.0
Chapter 4: Additional Hardware & Operation Chapter 4: Additional Hardware & Operation Chapter 4: Additional Hardware & Operation Chapter 4: Additional Hardware & Operation Chapter 4: Additional Hardware & Operation
Now all routers can be controlled by the computer. Remember that this configuration is used solely
to control the units. Each unit remains separate and distinct. You cannot connect an input to a
SmartNet-V unit and route it to the output of another unit. Inputs and outputs must remain within
Inputs and outputs must remain within Inputs and outputs must remain within Inputs and outputs must remain within Inputs and outputs must remain within
the same unit. the same unit. the same unit. the same unit. the same unit.
In the software, the settings for the SmartNet-V will be 48 inputs and 48 outputs when using three
routers. SmartNet-V routers will be assigned certain numbers. The primary router (using address 0)
will have inputs/outputs 1 through 16; the second router (using address 1) will have inputs/
outputs 17 through 32, and so forth.
If you want to be able to route any of 16 inputs to any of the 48 outputs, do the following:
If you want to be able to route any of 16 inputs to any of the 48 outputs, do the following: If you want to be able to route any of 16 inputs to any of the 48 outputs, do the following: If you want to be able to route any of 16 inputs to any of the 48 outputs, do the following: If you want to be able to route any of 16 inputs to any of the 48 outputs, do the following:
1. Complete the 3 steps found in the previous section (Configuring more than one
SmartNet-V Router). This will allow you to control all of the routers.
2. Connect the Active Splitter cable to the three routers. This cable has three connections.
Each of those connections should align vertically and hook up to the same input on all
routers.
3. Connect the inputs into the main router. These inputs will actually hook onto the active
splitter cable.
You now have 16 inputs that are available to 48 different outputs.