Smart Avi SMTCP - Manual

Introduction
With SMTCP you can now control SmartNETX, SmatNETV,
AVRouter over the Internet.
Instructions
Connecting the SMTCP
(See diagram below)
3.0 RS232/422 converter.
The frame control interface uses RS422. A full duplex 1.
5 wire balanced communications standard that allows
communications to be multi-dropped to more than
one Frame.
Since PC’s only come with RS232 ports, a small
2.
converter is required to convert the RS232 signals to
RS422.
If you purchased any of the SmartAVI software op-
3.
tions you will have received a suitable converter and
cable.
Operation
Connect to SMTCP by typing http://192.168.2.1 in 1.
the address field of your browser, then click Enter.
(Figure 1)
A login window will open.
2.
For security reasons, the SMTCP has its own user 3.
name and password. When prompted, enter Ad-
minstrator for the SMTCP user name and admin for
the SMTCP password. (figure2)
After accessing the browser, the user will be able to
4.
select these 4 functions;
Input/Output Select • to switch to different
port in the router.
TCP/IP Settings
• to choose another ip address
Admin Password • change your password*
Logout. •
When changing input output, press update to send
the command to the matrix.
*It is strongly suggested that you change your login
and password at this time.
What’s in the box?
The product package should contain the following
Smart Audio Video Integration
3111 Winona Ave., Suite 101 - Burbank, California 91504
Phone: (818) 565-0011 - Facsimile: (818) 565-0020
User Manual - SMTCP
Installation Diagram
Login:
Password:
Administrator
admin
Figure 2
Description Qty
SMTCP Device 1
AC Power Adaper (Varies by region) 1
RS232 to RS422 converter 1
Serial Male to Male crossed cable 1
Figure 1